Step-by-step guidance is provided for installing the panels on the HydraFiber Processing Unit once the conveyor assembly is in place. Users are instructed to work from the soil infeed side, using common tools and a folding ladder for easier access. Bale guide panels A and B are installed first, with seals positioned to rest on the conveyor belt and pinch roller shaft. Subsequent steps cover installing clearly labeled left and right side panels, adding the upright brace, mounting the lower conveyor drive motor and upper conveyor drive chain, and finally reinstalling all guards and securing doors.
Key Points
- Begin from the soil infeed side after conveyor assembly is complete, using common tools and a folding ladder for easier installation.
- Install bale guide panels A and B using upper conveyor hardware, positioning the upper and lower seals as shown so they rest on the conveyor belt and pinch roller shaft.
- Attach left and right side panels, along with upright brace J, in alphabetical order as labeled in the diagrams.
- Finish by installing the lower conveyor drive motor, upper conveyor drive chain, and all guards, ensuring all doors are securely fastened.
